Get free quotes

Surfaces & services

Fix the damaged tile, not the whole floor

Free quotes from rubber floor repair and cleaning teams across South Africa. One request, no obligation.

A single cut-out rubber tile lifted from a black gym floor beside a new replacement tile in Gqeberha
PatchLift, replace, re-bond
Patched, replaced, cleanedBatch B6, ref RT RUB 459

At a glance: Rubber Floor Repairs and CleaningRef RT RUB 459

Suits
Gym, play, garage and outdoor rubber floors
How it is made or laid
Cut out, replace, re-glue, patch, top up
Sizes
From one tile to a whole poured surface
Check first
Find the cause before fixing the damage
Lead time
Small repairs in days, top-ups need dry days

Rubber floors are tough, but they do get gouged, burnt, lifted at the edges and worn thin under swings. The good news is that most rubber floor repair work is local: cut out and replace a tile, re-glue an edge, patch a hole in wetpour or put a new top layer on a tired surface. Cleaning matters as much, because the wrong product can do more damage than a dropped dumbbell. This page covers repairs, deep cleaning and what to avoid. Send one request and independent installers and suppliers who work in your area quote you directly.

Replacing tiles and re-gluing edges

A cracked, burnt or gouged tile is usually cut out and replaced: the old tile and glue are scraped off, the base cleaned and a new tile glued in. This is why installers suggest keeping spare tiles from the same batch: colours vary between batches, and a new tile can stand out. Lifted edges are cleaned under the edge, re-glued with a PU adhesive and weighted down until cured. If edges keep lifting, find the cause first: damp in the slab, a missing ramp, or tiles that were never acclimatised.

Patching and topping up wetpour

On poured surfaces, holes and torn edges are cut back to sound material and filled with fresh crumb and PU binder. Worn areas under swings, slide exits and gates can be patched, and a whole surface that is sound underneath can get a new EPDM top layer. On a playground, ask the contractor to restore the original thickness so the surface still matches the fall height it was laid for. Patches start brighter than the old surface and soften with sun and wear.

How to clean a rubber floor

  • Sweep or vacuum grit daily: sand acts like sandpaper underfoot.
  • Mop or scrub with a pH-neutral cleaner and water, then let it dry.
  • For textured or flecked gym floors, a scrubber machine with a soft brush lifts sweat and dirt from the surface.
  • Hose outdoor tiles and sweep sand and leaves off so drains keep working.
  • Wipe oil and fuel up quickly, especially on garage tiles, as they can swell SBR rubber.

What not to use

Avoid solvents, thinners, oil-based polishes, bleach in strong doses and harsh degreasers: they can dry, swell or discolour rubber and leave a slippery film. Wax makes rubber dangerous to walk on. Some floors take a rubber floor sealer or dressing that eases cleaning, but not every product suits every floor, so ask the maker first. "Repair kits" sold online are usually PU binder and crumb or a tube of glue; they work for small jobs if you match the rubber. For glue choices, see rubber flooring adhesive.

What to put in your request

  • Photos of the damage and of the whole floor
  • The kind of floor: tiles, rolls or poured
  • The size of the floor and the area to repair in m²
  • Spare tiles from the original batch, if any
  • Whether you also want a deep clean or a sealer

Rubber Floor Repairs and Cleaning for gyms, schools, homes, industry and farms

  • Gyms and fitness studios: dented and burnt tiles cut out and replaced, then a full scrub of the floor
  • Schools, crèches and play areas: worn wetpour under the swings patched back to its original thickness
  • Homeowners: a lifted patio tile re-glued and a garage floor cleaned of oil
  • Factories, mines and plants: torn walkway sheeting cut out and new lengths glued in
  • Shops, offices and entrances: scuffed entrance tiles replaced and the floor sealed for easier cleaning
  • Hotels, lodges and restaurants: a faded pool surround patched and a hotel gym deep cleaned
  • Municipalities, parks and sports clubs: park playgrounds topped up and loose edges re-bonded
  • Hospitals, clinics and care homes: lifted seams in a rehab room re-glued so walking frames do not catch
  • Farms, stables and dairies: a stall mat floor re-laid tight after bedding worked under the edges

Frequently asked questions

Can one damaged rubber tile be replaced without lifting the floor?
Yes, on most glued or loose-laid tile floors. The tile is cut out, the base cleaned and a new one fitted. Interlocking tiles can sometimes be unlocked and swapped. The hard part is matching the colour, so ask the supplier for the same product and keep spares.
Why does my rubber floor smell?
New recycled SBR rubber has a rubber smell that fades with airing over weeks. A smell that comes back may be sweat, spilt drinks or damp trapped under the floor. Deep clean with a pH-neutral cleaner and check for moisture under lifted tiles.
Is it worth repairing an old playground surface?
Often, if the base is sound and the surface is worn only in places. If it is thin, cracked all over or the base has failed, replacement may cost less over time. A contractor can measure the thickness and advise.
Do you repair rubber floors yourselves?
No. We are a free quote request service. We send your request to independent installers, surfacing contractors and suppliers who work in your area, and they quote you directly. We do not do repairs or inspections.

Rubber Floor Repairs and Cleaning by province and city

More rubber tiles, mats and services

Free quote request, no obligation

Request quotes for rubber floor repairs

Measure it the way an installer would: the length and width of the floor and what is under it, or how many mats and how big, or simply how many vehicles. The plan tiles your floor as you type. Suppliers and installers in your area quote you directly.

Floor plan and quote requestRubber Floor Repairs and Cleaning
Request
63136
Batch
F3
Date
2026-11-17
Cost
Free

1The job

2The area (optional, it helps the quote)

The area in planto scale, roughly

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a site measure.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: tiles, edges, ramps, mats, glue or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable rubber flooring suppliers and installers. See our privacy policy.

Get free rubber flooring quotes