Get free quotes

Surfaces & services

A rubber surface mixed on site and trowelled into one piece

Free quotes from poured rubber surfacing contractors across South Africa. One request, no obligation.

A poured green and blue EPDM rubber surface with curved colour bands around a hotel splash pad in Durban
No jointsPoured in place, no joints
Poured on site, no jointsBatch R8, ref RT EPD 727

At a glance: Poured EPDM Rubber Surfacing (Wetpour)Ref RT EPD 727

Suits
Playgrounds, splash pads, pool decks, paths
How it is made or laid
SBR shock layer, EPDM top, PU binder
Sizes
Thickness set by fall height or use
Check first
A firm, drained base with a fall
Lead time
Booked around dry weather, then curing time

Wetpour is the soft, joint-free surface you see under jungle gyms, around splash pads and on hotel pool decks. It is made on site from rubber crumb and a coloured top layer of EPDM rubber granules, mixed with a polyurethane binder and trowelled out like a screed. Because it has no joints it follows curves, slopes and tree roots and has no edges to lift. This page explains the layers, the base, the weather it needs and how it compares with tiles. Send one request and independent surfacing contractors who work in your area quote you directly.

What goes into a wetpour surface

Most poured surfaces have two layers. The base or shock layer is coarse SBR crumb from recycled tyres, bound with polyurethane (PU) binder and laid to the thickness the job needs. The top or wearing layer is finer EPDM granules, also bound with PU, trowelled smooth to a thinner, even finish. EPDM is a synthetic rubber that holds its colour in the sun better than painted SBR, which is why it goes on top. On a playground the total thickness follows the fall height of the equipment, the same rule that applies to playground rubber tiles.

The base decides how long it lasts

Wetpour is only as good as what is under it. Contractors pour onto sound concrete, asphalt or a well compacted crusher run base, laid with a fall so rain runs off or drains through. Soft spots, standing water and loose edges show up later as dips, cracks and lifting. The edges need a kerb, a cast edge or a tapered finish so they cannot be kicked loose. If you want to pour over old paving or tiles, ask the contractor to check them first: loose or rocking units will not hold a new layer.

Weather, curing and colour

PU binder needs dry conditions to mix, lay and cure. On the Highveld and in KwaZulu-Natal, crews plan around summer afternoon storms; in the Western Cape the winter rain is the problem. After pouring, the surface needs curing time before anyone walks or plays on it, and longer in cool, damp weather: ask the contractor how long for your job. Colours can be blended, banded or poured as shapes such as hopscotch grids, tracks and simple designs. Bright EPDM colours usually cost more than black or red, and every extra colour adds work.

Wetpour or rubber tiles?

Pour suits odd shapes, slopes, mounds, areas around trees and anywhere a joint could trip someone or let water in. Tiles suit flat, square areas, can be laid in less settled weather and are simple to replace one at a time. Wetpour can be patched and topped up, but a patch rarely matches the old colour exactly (see rubber floor repairs). For patios and walkways, compare it with outdoor rubber tiles and rubber pavers.

What to put in your request

  • The area in m² and a sketch of the shape
  • The base now: concrete, asphalt, paving, soil or grass
  • For play areas, the free height of fall of the equipment
  • The colours, bands or shapes you want poured in
  • Access for mixers and materials, and when you need it open

Poured EPDM Rubber Surfacing (Wetpour) for gyms, schools, homes, industry and farms

  • Gyms and fitness studios: a poured outdoor training strip for sled pushes, sprints and functional fitness classes
  • Schools, crèches and play areas: a poured surface under the jungle gym and around the swings, built to the fall height
  • Homeowners: a soft poured surface for a garden play area or around a splash pool
  • Factories, mines and plants: a poured walkway or rest area outside a plant, laid over sound concrete
  • Shops, offices and entrances: a poured play corner beside a restaurant, mall courtyard or office park
  • Hotels, lodges and restaurants: a coloured poured surface around a hotel splash pad or lodge pool
  • Municipalities, parks and sports clubs: park playgrounds and outdoor gyms poured to the fall height, with kerbs and drainage
  • Hospitals, clinics and care homes: a level poured garden path for a care home or rehab centre
  • Farms, stables and dairies: a poured play area at a farm stall, wedding venue or agri-tourism stop

Frequently asked questions

What is the difference between EPDM and SBR rubber crumb?
SBR crumb is granulated rubber from end-of-life tyres: black, cheaper and used for the shock layer. EPDM is a synthetic rubber made in colours that hold up better in the sun, so it forms the top layer. Some budget jobs use coloured or coated SBR on top; ask what the top layer is made of.
How thick does a poured playground surface need to be?
It depends on the free height of fall of the equipment. Ask for the maker's or contractor's test certificate to the European standard EN 1177, which shows the critical fall height for each build-up of shock layer and top layer, and match it to your equipment. No surface makes every fall safe.
Can a worn wetpour surface be repaired?
Yes. Holes, torn edges and worn spots under swings and slide exits can be cut back and patched, and a tired surface can often be given a new top layer if the base layer is still sound. Expect the new colour to stand out at first.
Do you pour wetpour yourselves?
No. We are a free quote request service. We pass your request to independent surfacing contractors who work in your area and they quote you directly. We do not lay surfaces or certify fall heights. See about us.

Poured EPDM Rubber Surfacing (Wetpour) by province and city

More rubber tiles, mats and services

Free quote request, no obligation

Request quotes for a poured EPDM rubber surface

Measure it the way an installer would: the length and width of the floor and what is under it, or how many mats and how big, or simply how many vehicles. The plan tiles your floor as you type. Suppliers and installers in your area quote you directly.

Floor plan and quote requestPoured EPDM Rubber Surfacing (Wetpour)
Request
21173
Batch
Y9
Date
2026-11-17
Cost
Free

1The job

2The area (optional, it helps the quote)

The area in planto scale, roughly

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a site measure.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: tiles, edges, ramps, mats, glue or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable rubber flooring suppliers and installers. See our privacy policy.

Get free rubber flooring quotes