Rubber tiles come in fixed sizes, so a floor is never just its area divided by the tile. The edges need cut tiles, every corner wastes a little, and a few spares save a trip when one is damaged. This calculator lays the tiles on your floor, tries them both ways round where the tile is not square, and counts what to order.
How the count works
The floor is divided into rows and columns of tiles. Any row or column that does not fit exactly ends in a cut tile, and the calculator shows those hatched on the plan. Tiles to order are all the places on the grid plus a spare allowance: 5% suits a plain rectangle, 7% is the usual figure and 10% allows for pillars, doorways, angled walls or a pattern of colours. An offcut can sometimes fill a place on the opposite edge, so an installer may order a few less.
Ramps and edging
Where the tiled floor stops in the open, at a doorway or the edge of a gym zone, people trip on the step. Ramps or bevelled edge strips run along those sides. Choose how many sides are open and the calculator gives the running metres. Wall to wall floors usually need none. Thick playground tiles and gym drop zones need deeper ramps than thin interlocking tiles.
Weight and delivery
The weight is a rough guide for delivery and handling, worked out at about 0.95 kg per square metre for every millimetre of thickness, which is typical of bonded rubber crumb. A 1 x 1 m tile 20 mm thick is then about 19 kg. Ask whether delivery is to the kerb or into the building, and whether a pallet can be offloaded at your gate.
What the price range covers
The range is the price of the tiles only, per square metre ordered, from published South African shop prices checked in November 2026 (the low end is bulk or sale pricing, the high end single tiles). Glue or pins, edging, base repairs, delivery, laying and VAT can all be extra. Use the figures to sense-check quotes, then send the sizes on the form below for real prices.
